DIY Blog
Noise, dust, and endorphins.
© 2025. All rights reserved.
I've explored many different planes in pursuit of the ultimate rabbet-making tool, all to no avail. The next logical step is to try a carriage maker's plane. While this Faithfull #10 plane is a cheaply-made modern piece, with some work, I can transform it into something nice.
Continue reading...
One of my Stanley bench planes had a small adjusting nut that was challenging to reach and turn, especially with the same hand that's holding the plane by the tote. Sure, I could have bought a replacement, but where's the sport in that?
Continue reading...
I've always wanted to have a nice marking knife, and my curiosity led me to this Narex kit. It comes with the fully sharpened blade and two brass pins, but wood needs to be supplied separately. I chose walnut as it complements the brass beautifully and takes on a fantastic appearance with an oil and wax finish.
Continue reading...
I typically use my cordless drill for drilling small holes and deburring them. However, there are times when I prefer to hold the drill bit in my hand, especially when I need to remove a burr or delicately clean out a hole. This simple tool is the solution to this problem.
Continue reading...
I built this handscrew clamp from a kit that I recently purchased. The kit included all the metal hardware and birch handles, requiring only the construction of the clamp bodies from wood.
Continue reading...